Products
Home > Products
〈CT-SF 1W Lead-Free Bush | 〈Metallographies Structure | ||||||||||||||||||
|
1.PTFE with fibre 0.01~0.03mm 2.Porous bronze 0.2~0.3mm 3.Steel backing 0.7~2.3mm 4.Tin-plating 0.005mm or copper plating 0.008mm |
||||||||||||||||||
〈Introduction | |||||||||||||||||||
CT-SF 1W is a new type bushing without lead composition which is developed aiming at increasing demands on environmental protection.Besides its wide application on general machines,SF-1X is particularly suitable for food machine,Pharmaceutical machine,tobacco,machine etc. | |||||||||||||||||||
〈Technical | |||||||||||||||||||
Load capacity:140N/mm2 Temperature:-195~+280°C Speed limit:5m/s Friction coef(u):0.04~0.20 PV LIMIT(Dry):3.6N/mm2 .m/s PV LIMIT(Oil):50N/mm2 .m/s |
|||||||||||||||||||
〈Application: | |||||||||||||||||||
1.PTFE and fibre can protect the shaft while in operation. 2.It is suitable for the machine required harmless to people because of Lead-free. 3.Goodload capacity and anti-wear. 4.Bronze and steel have good thermal conductivity. 5.Anti-corrosion because of surface plating. 6.It is widely used in general machines,and suitable for food machine,pharmaceutical machine,tobacco machine etc.It will subsitute SF-1 in future because of environment protection. |
|||||||||||||||||||
〈CT-SF 1W CHEMICAL CHARACTERISTICS | |||||||||||||||||||
|
|||||||||||||||||||
〈MMD-10 Friction&Wear Test |
Type | Time | Test Condition | Friction coef(u) |
TEMP. (°C) |
Wear (mm) |
||
Lubricate | Speed | Drang | |||||
CT-SF 1W | 3hr | Dry | 0.4m/s | 3.5N/mm2 | 0.156 | 93 | 0.009 |
CT-SF 1W | 3hr | Oil | 0.4m/s | 3.5N/mm2 | 0.056 | 52 | 0.01 |